Dri-eaz DRIZAIR 2400 LG User Manual download pdf

Owner’s Manual – DrizAir Dehumidifiers

DrizAir 80, DrizAir 1200, DrizAir 2000 LG, DrizAir 2400 LG

115-volt models

DRI-EAZ PRODUCTS, INC.

15180 Josh Wilson Road, Burlington, WA USA 98233

Fax: (360) 757-7950 Phone: (360) 757-7776 www.dri-eaz.com

DrizAir Dehumidifiers are commercial refrigerant dehumidifiers, designed for drying building structures

and contents. They are designed for high performance water removal, as well as durability and ease of use.

Read And Save These Instructions

Safety Information

Keep Children Away: Do not allow children to play with or

around the unit, which could result in injury. Be sure the unit is

inaccessible to children when not attended.

Keep Unit Grounded: Always operate the unit with a grounding

plug and a grounded electrical outlet. A grounding plug is an

essential safety feature that helps reduce the risk of shock or

fire.

Protect Power Cord from Damage: Never operate a unit with a

damaged power cord, as this may lead to electrical or fire haz-

ards. If the power supply cord is damaged, it must be replaced

by a cord of the same type and amperage rating.

Extension Cords: Extension cords must be grounded and able

to deliver the appropriate voltage to the unit.

Handle With Care: Do not drop or throw the unit. Rough treat-

ment can damage the components or wiring and create a haz-

ardous condition.

Run on Stable Surface: Always operate the unit on a stable,

level surface, like the floor or a strong counter, so it cannot fall

and cause injury.

Secure During Transport: When transporting in a vehicle, se-

cure the unit to prevent sliding and possible injury to vehicle oc-

cupants.

Keep Out of Water: Never operate the unit in pooled or standing

water, as this may create a risk of injury from electrical shock. Do

not store or operate outdoors. If electrical wiring or components

become wet, thoroughly dry them before using the unit.

Keep Air Intakes Clear: Do not clog or block air intakes, as may

occur if operated to close to draperies or similar materials. This

may cause the unit to overheat and result in a fire or electrical

hazard.

Keep Filter Clean: Always use a clean air filter. Do not allow

any material to clog the filter, as this may cause the dehumidifier

to overheat. Do not allow oil, grease, or other contaminants to be

drawn into the dehumidifier.

Keep Electrical Components Dry: Never allow water inside the

dehumidifier's electrical components. If these areas become wet

for any reason, thoroughly dry them before using the dehu-

midifier.

Allow Repair Only by Qualified Person: Do not attempt to dis-

assemble or repair the unit if you are not qualified to do so. You

may handle some maintenance and troubleshooting, but make

sure that more complex problems are handled by an authorized

service technician. For information about authorized repair, call

Dri-Eaz at (360) 757-7776.

HOW TO USE DEHUMIDIFIERS

DrizAir Dehumidifiers are designed to reduce water vapor or high

humidity in a building or part of a building. The purpose is to pre-

vent humidity damage, and to dry out wet materials such as car-

pet, carpet cushion, floors, walls, furniture, contents, lumber, and

structural materials.

To speed up the rate of evaporation, and dry out materials faster,

use Dri-Eaz TurboDryer airmovers. The DrizAir Dehumidifier will

be needed to remove the additional water evaporated by the

TurboDryers.

Positioning Dehumidifiers

The dehumidifier must be operated in an enclosed area to

achieve best efficiency. Close all openings to other areas of the

building, like windows and doors, to prevent moist air from mix-

ing with the air in the drying area. Keep traffic through doors at a

minimum. This forms a closed drying chamber.

Inside the drying chamber, air should circulate freely. Open inte-

rior doors and operate TurboDryer airmovers to maintain good

airflow to all areas.

Place the dehumidifier where there is no restriction to air flowing

through either the inlet or the outlet. Keep away from loose mate-

rials like curtains and drapes.

Under normal circumstances, place the dehumidifier in the cen-

ter of the room. To dry a specific area, place the dehumidifier so

the outlet air points at the wet area and the warm, dry air passes

across it. The duct should never be closer than three feet from

the wall.

The DrizAir Dehumidifier warms the air as it removes its mois-

ture. In smaller rooms this can raise the temperature substan-

tially. Room temperatures of about 68° to 80° F (20° to 27° C)

are usually a good condition for drying. Never allow the room

temperature to exceed 100° F (38° C), because this could dam-

age the dehumidifier or building contents.

OPERATING INSTRUCTIONS

1. Operate the DrizAir Dehumidifier only in the upright position.

If it has been in a horizontal position for any time over a few

minutes, let it sit in the upright position for at least 30 minutes

before starting. This allows oil to drain back into the com-

pressor, increasing its life.

2. Plug in to a standard outlet with the correct voltage and am-

perage for the unit. Push the ON

switch. Listen for proper

operation of fan and compressor before leaving the unit unat-

tended.

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - Safety Information

Page 2 - MAINTENANCE

Page 3

Page 4 - TROUBLESHOOTING

Page 5 - Directives de sécurité

Page 6

Page 7 - CONNECTIONS ELECTRIQUES

Page 8

Page 9 - Información de seguridad

Page 10

Page 11 - MANTENIMIENTO

Page 12 - RESOLUCIÓN DE PROBLEMAS

Comments to this Manuals

No comments

Dri-eaz DRIZAIR 2400 LG User Manual

Browse online or download User Manual for Air equipment Dri-eaz DRIZAIR 2400 LG. Dri-Eaz DRIZAIR 2400 LG User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Air equipment Dri-eaz DRIZAIR 2400 LG